What can your home support?
We look at your electrical capacity and daily driving together, so you can understand what you need before spending on equipment or upgrades.
Hardwired EV charging
Choose a charger that fits your car, your home and the way you live. We’ll take care of the installation.
Hardwired home chargingTesla & ChargePoint certified
01 / Your installation
We specialize in permanent, hardwired home charging. We’ll plan a direct wired connection, sensible cable reach and a tidy installation around the way you park.
We look at your electrical capacity and daily driving together, so you can understand what you need before spending on equipment or upgrades.
Think about the charging port, cable reach, garage storage and the way you enter and leave. Placement should feel natural every day.
We’ll walk you through the cable route, equipment and proposed work, with a clear scope and price before you decide.

Home charging capacity
If your home has limited electrical capacity, there are several ways to make room for one or two EV chargers. We check how much power your home already needs before recommending equipment.
A qualifying system’s maximum current setting may be used for the feeder or service it limits. The setting is treated as a continuous load.
Where a qualifying system manages the chargers, the maximum charging load it permits is used for the service or feeder.
The system must prevent overload on the circuit, feeder, or service it controls. The section also addresses system malfunction.
NEC 625.41 example · A charger set to 32 A typically requires a 40 A breaker under the 125% rule. The home’s service capacity is checked separately.
Bellevue: 2023 NEC and 2023 Washington Cities Electrical Code. Seattle: Its amendment to 220.70 prohibits using energy management to reduce required Article 220 calculations for new service installations.
Read the 2023 NEC on NFPA LiNK ↗ Bellevue code ↗ Seattle amendments ↗
Load management may avoid a panel or service upgrade once the load calculation and proposed controls are verified.
02 / Choose your charger
Start with the way you drive—not a specification sheet. The app, connector and parking arrangement can matter as much as the charger itself.
A connected Tesla home
Schedule charging and review session history in the Tesla app—even with a non-Tesla vehicle. A natural option if you already use Tesla energy products.
Wall Connector supports up to 48A. Universal Wall Connector adds an integrated J1772 adapter for households using both NACS and J1772.
Shown: Gen 3 Wall Connector.
Explore Tesla charging ↗Home and public charging
A useful fit if you want home charging and ChargePoint public charging in one app, with reminders to plug in and scheduling around your electricity rate.
Available with J1772 or NACS. We match the connector to your vehicle and plan the hardwired installation around your home.
PSE lists Home Flex as rebate eligible.
Explore Home Flex ↗Two cars, one shared supply
Two cables let both vehicles stay connected. Syndicate Electric has installed several Duo units and can help you think through a two-car arrangement.
Shown is the original Duo. The newer Duo Connect 40A adds Wi-Fi and J1772/NACS cable choices, sharing up to 40A total between two vehicles.
Input cord omitted from the photo for clarity. Connection options vary by model; we’ll confirm the manufacturer-approved setup for your exact Duo before installation.
Explore Duo Connect ↗Product views focus on the charger bodies; cables are cropped for comparison. Actual charging speed depends on the vehicle, circuit and configured output.
03 / Compare the apps
Both apps handle scheduled home charging. Their strengths become clearer when you consider how you track energy, remember to plug in and charge away from home.
| Your priority | Tesla app | ChargePoint app |
|---|---|---|
| Charge on your schedule | Custom charging windows and a Start Charging override. | Weekday/weekend schedules and utility-rate-based planning. |
| Understand home charging | Up to 12 months of sessions, including duration and energy delivered. | Home charging activity, energy use and estimated costs based on your selected rate. |
| Avoid forgetting to plug in | Review charging status and schedules in the app. | Set a reminder that notifies you if you have not plugged in. |
| Keep things in one place | Wall Connector alongside your other Tesla energy products. | Home charging alongside ChargePoint public charging activity and station discovery. |
A charger’s energy reading is not the same as your car’s battery percentage. Check the vehicle app for battery state. Features and screens can change with software updates.
04 / Charging two vehicles
You may not need two full-power charging circuits. Start with how far each car travels and how long both are parked overnight.
The Duo family shares available power between two connected cars. Convenient when both parking spaces are within cable reach.
Tesla Wall Connectors can share a configured power budget. Separate mounting locations can suit cars parked on opposite sides of a garage.
If the second car is still ahead, we can consider placement and future wiring during today’s project, helping avoid unnecessary rework later.
Tell us both vehicle models, your usual parking positions and typical daily mileage. We’ll help you compare the practical choices.
Plan for two vehicles →05 / PSE rebate
Buy a qualifying charger from your preferred retailer, keep your receipt, then apply to PSE after purchase and installation. You do not have to buy through the PSE Marketplace.
The standard rebate has no income test. It pays $300 toward a qualifying charger, or the purchase price if that is less than $300.
ChargePoint Home Flex is on PSE’s qualified-product list. Tesla Wall Connector and Grizzl-E Duo are not on the list reviewed for this guide. Other qualifying brands are available too.
You’ll need PSE residential electric service, an eligible EV or plug-in hybrid, and a qualifying installed charger connected to Wi-Fi.
One rebate per qualifying single-family residence in a five-year period. PSE’s application includes Flex pre-enrollment terms. Review the full conditions before applying.
Income-qualified households may receive additional assistance. PSE determines eligibility.
Keep the paid charger receipt showing the retailer, purchase date, exact model and price. PSE’s current PDF says to apply within 60 days of purchase; its web page says 60 days after installation. Apply promptly and confirm timing with PSE if the dates differ. Save a copy of your submission. The downloadable form is PSE’s May 2026 edition; information checked October 15, 2026.
06 / Ask for an estimate
Pick where you park and what you’re planning. We’ll turn those choices into a useful first message.
We’ll use these details to help you understand the next steps and prepare a proposal for your home.
For panel photos, keep protective covers in place. Do not expose wiring.
07 / A few final questions
You’re welcome to start with just your vehicle and a few photos of where you park. We can help you choose the equipment, check rebate eligibility and avoid buying a model that does not fit your plans.
Our standard service focuses on permanent, hardwired charging. If you already own a plug-in unit or are considering a Duo, send the exact model and a photo of your existing setup. We’ll explain the available options before you spend on additional equipment.
Yes—this is a good place to start your estimate request. Share your vehicle, project city and a few photos of the panel and parking area. We’ll review the likely wiring route and what your home needs, then explain the proposed work and price. If a site visit would help, we’ll let you know before arranging it.